Electrical

Back-up Lights don't Work

>My back-up lights don't work, I suppose the fault is in the switch,
>because the bulbs are both OK. Any experience? Where is this
>switch, on the gear mechanism or on the gearbox (3-sp auto)

There are a pair of connectors located in the spare wheel well behind a plastic cover. Take them
apart, clean the connectors, re-seat them and see if this helps. These connectors also provide
the gear indicators lights. So, if you also have noticed these are not illuminated the connectors
are a likely culprit.

HTH

Kevin Berez (kaberez@mindspring.com)
86.5 928S Auto Meteormetallic