Built a new engine harness

More
26 Apr 2013 22:40 #14517 by Proton_Ice
Hi guys,

My engine harmess rubs on the metal protection plate under the car.
A strand of wire that goes from the starter to the alternator is half cut and rubs on the metal plate !!!!

I looking on the forum and found a thread create by Brad (928mac) with one or 2 pict on his build engine harmess.

Looking to people who still made his harness for hint or tips ... or pict.

Thanks,

Please Log in or Create an account to join the conversation.

More
26 Apr 2013 23:25 #14519 by the flying scotsman
I thought motorsports made new harnesses, hold on a min.

look here www.928motorsports.com/parts/wiringharness.php

Please Log in or Create an account to join the conversation.

More
27 Apr 2013 12:34 #14527 by 928mac
Replied by 928mac on topic Built a new engine harness
Jean, can you post a picture of how bad it is and so that I can see where it is.
I bought a computer kit that came with the computer plug and 32 wires hanging off of it.
It replaced my EZK and harness
I had to cut them to length and install the connectors.
You can repair yours which would be much cheeper

This image is hidden for guests.
Please log in or register to see it.



This image is hidden for guests.
Please log in or register to see it.


Please Log in or Create an account to join the conversation.

More
30 Apr 2013 21:25 #14574 by otisp1
Replied by otisp1 on topic Built a new engine harness
Can also get used harnesses from Mark at 928 International. Prices aren't bad.

Please Log in or Create an account to join the conversation.

Moderators: Rich928mm928billvvOC

Don't have an account yet? Register Now!