'83-'84 US 16 Valve Parts '85 US Parts Car

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
05 Sep 2012 17:00 #10981 by Kiln_Red
I have all kinds of parts for US model 928s ranging from '83-'86. I DO NOT have any upholstery parts. All I really have for a 16 valve car is engine parts; Engine, intake, fuel rails, ignition parts, etc. It should be noted that the engine is in no way ready to drop in another car. It had developed an internal water leak before it was pulled. The heads should be inspected/replaced, gaskets replaced, and WP/TB done. Probably not a practical future.

The '85 is a different story. Again, though, it has motor issues. Never 100% verified but all indicators point to bent valves. I believe a previous mechanic misaligned the sprockets to the crank while doing the timing belt service. Anyway, the interior has been 100% stripped. Mostly all I have is a body and engine parts. No windshield. No hatch. No fenders, hood, or front bumper. Everything else is there. Doors, glass, rear bumper, etc. If you're looking for exhaust parts it's worth noting the y-pipe was ruined after the catalytic converter was stolen. Thought some of this may be of use to someone.

This image is hidden for guests.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

More
06 Sep 2012 00:53 #11018 by Jon B.
Replied by Jon B. on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Austin, I need the passenger side view mirror glass, though it may be easier to just send the whole assembly. I bought a newer mirror and broke it trying to figure out how to unfasten it. Since the "old" style only has three little prongs, they are much easier.

Also, is the drivers door handle hinge assembly in good shape? Mine is on its last leg! I have to push "in" on the door while simultaneously working the handle to open it. Apparently this is relatively common?

Let me know!

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
06 Sep 2012 03:06 #11021 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Unfortunately, the driver door handle on the '85 has the same feel. I have the mirror and will sell you just the glass, if that is all you need.

Please Log in or Create an account to join the conversation.

More
06 Sep 2012 09:20 #11031 by newtoporsche
Replied by newtoporsche on topic '83-'84 US 16 Valve Parts '85 US Parts Car
hi
i need an ignition cyl lock with key
will yours work in a 79

Thanks
Russ
208-681-1269

Please Log in or Create an account to join the conversation.

More
06 Sep 2012 14:59 #11045 by Jon B.
Replied by Jon B. on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Austin, yes, I only need the glass. So long as it's the "old style" with the three prongs holding it in.

Search continues for the hinge assembly!

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
06 Sep 2012 15:47 #11047 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car

Austin, yes, I only need the glass. So long as it's the "old style" with the three prongs holding it in.

Search continues for the hinge assembly!


Jon, I'll take $35 for it.

hi
i need an ignition cyl lock with key
will yours work in a 79

Thanks
Russ
208-681-1269


Russ, yes, the lock cylinder will work in your '79. I also have the key that goes with it. I'll take $80 for it.

Please Log in or Create an account to join the conversation.

More
06 Sep 2012 15:51 #11048 by Jon B.
Replied by Jon B. on topic '83-'84 US 16 Valve Parts '85 US Parts Car
K, FYI, I refuse to continue using Paypal. So, let me know how you would like to handle payment.

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
06 Sep 2012 15:57 #11050 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Can you send a money order?

Please Log in or Create an account to join the conversation.

More
06 Sep 2012 17:26 #11056 by Jon B.
Replied by Jon B. on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Indeed I can. PM your info and I'll get my wife on top of it.

Please Log in or Create an account to join the conversation.

More
09 Sep 2012 14:19 #11115 by avanhelden
Replied by avanhelden on topic '83-'84 US 16 Valve Parts '85 US Parts Car
How about right ventilation grille and left ventilation hose? ( I destroy thing in rather unique ways)

Please Log in or Create an account to join the conversation.

More
17 Sep 2012 16:23 #11281 by emmanuelli
Replied by emmanuelli on topic '83-'84 US 16 Valve Parts '85 US Parts Car
do you have the knobs that hold the tool case? or the hatch shades holders? there is a piece of rubber that keeps the hatch in place, im missing the passenger side one, not sure what its called.

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
18 Sep 2012 21:39 #11319 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car

do you have the knobs that hold the tool case? or the hatch shades holders? there is a piece of rubber that keeps the hatch in place, im missing the passenger side one, not sure what its called.


Sorry, I do not have a hatch or any interior parts.

Please Log in or Create an account to join the conversation.

More
23 Sep 2012 23:30 #11412 by chipu12
Replied by chipu12 on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Hi,i have an 84 US (16v) and i need 2 fuel injectors, do you have them?
Regards
Chip

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
24 Sep 2012 10:21 #11415 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Chip,

I have 8 additional fuel injectors. I don't want to dismantle the fuel rails. I can sell you either or both complete fuel rails. Thank you for your interest.

Please Log in or Create an account to join the conversation.

More
24 Sep 2012 12:34 #11422 by chipu12
Replied by chipu12 on topic '83-'84 US 16 Valve Parts '85 US Parts Car
ok, how much for one rail?

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
24 Sep 2012 13:57 #11424 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car
I'll take $150 for a complete rail w/injectors.

Please Log in or Create an account to join the conversation.

More
24 Dec 2012 10:18 #13002 by mm928
Replied by mm928 on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Hey Austin - just noticed this post. I need replacement lower exterior window seals. You said you had mostly engine parts for the 83 though.
They are the rubber ones that run along the bottom of the door windows on both sides. Anyway, if you have some decent ones, just let me know. I have an 83 US.

1983 928S - 16v 4.7L L-Jetronic
Dark Grey w/ Blue Leather
85/86 exhaust manifolds
Y-Pipe
SS Hi-perf Cat
S4 springs
Bilstein shocks
Air pump delete
VIN: WP0JB0926DS861180
- - Isn't Life great? - -

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
24 Dec 2012 12:25 #13003 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car

Hey Austin - just noticed this post. I need replacement lower exterior window seals. You said you had mostly engine parts for the 83 though.
They are the rubber ones that run along the bottom of the door windows on both sides. Anyway, if you have some decent ones, just let me know. I have an 83 US.


Mike,

My best advice would be buy a new pair from Roger. I think he sells them for roughly $130 a pair IIRC. The door trim on the '85 appears good as there is no obvious dry rotting, but I can see that water is collected in the bottom of the doors as I have all of the interior removed..

Note: The door trim is tricky to replace. They fit tightly. You can get a set of good, sturdy plastic clip tools at Harbor Freight. Remove the door panels and do this from the inside of the door. The easiest way to remove them is to overlap a pair of plastic door trim tools as you fit them both beneath the lip of the trim. Use the one in your left hand as a lever and the other for your prying force. The door trim will pop up. It will be tempting to grab it with your hands and to remove it the rest of the way. To prevent any damage to the door, continue using the clip tool method to remove the trim until it is free of the door. Be mindful of the glass as you do this. It is unlikely to damage it in this process, but it is possible if you aren't using the correct tools.

Please Log in or Create an account to join the conversation.

More
24 Dec 2012 21:27 #13004 by mm928
Replied by mm928 on topic '83-'84 US 16 Valve Parts '85 US Parts Car
130 is not bad a tall, thanks Austin, will give Roger a call. I heard they were a bear.....
In fact I have a Harbor Freight nearby so I will see if I can snag a plastic clip tool.

1983 928S - 16v 4.7L L-Jetronic
Dark Grey w/ Blue Leather
85/86 exhaust manifolds
Y-Pipe
SS Hi-perf Cat
S4 springs
Bilstein shocks
Air pump delete
VIN: WP0JB0926DS861180
- - Isn't Life great? - -

Please Log in or Create an account to join the conversation.

More
30 May 2013 22:56 #14931 by smtcapecod
Replied by smtcapecod on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Hi, I'm getting the aesthetic bug again...I could use a pair of S3 cam covers to powder coat. My 86.5 has the long bolts, if that makes any difference on hte cam covers..

Please Log in or Create an account to join the conversation.

  • Kiln_Red
  • Kiln_Red's Avatar Topic Author
  • Offline
  • Moderator
  • Moderator
More
30 May 2013 23:11 #14933 by Kiln_Red
Replied by Kiln_Red on topic '83-'84 US 16 Valve Parts '85 US Parts Car
Steve,

Does a $150 sound reasonable for the pair of cam covers?

Please Log in or Create an account to join the conversation.

More
07 Jun 2013 18:04 #14997 by smtcapecod
Replied by smtcapecod on topic '83-'84 US 16 Valve Parts '85 US Parts Car
HI, I think it does, but I had a local samaritan donate a pair for core purposes.

I'll keep my thinking cap on.

Please Log in or Create an account to join the conversation.

Moderators: Rich928mm928billvvOC

Don't have an account yet? Register Now!