Lots of great 928 parts for sale

More
24 Jun 2014 11:34 #17337 by Fronkenstein
Cleaning out the pile from my project. So here goes:

1) $750 - 1 Complete set of 1978-82 cylinder heads from an M28.01 reman'd by R&L Engines of Dover NH. A couple of new valves. New exhaust guides. All new valve seals. Shaved .007" differential measured. These are bolt on ready to go.

2) $400 - 1 Complete set of RaRst rods and 98mm Pistons on a 78.5mm stroke from an M28.20. Everything appears to be in great condition with one piston skirt experiencing some minor scuffing.

3) $250 - 1 Forged steel crankshaft to match the rods and pistons above from M28.20. Crank is in very good condition

4) $750 - Completely rebuilt CIS for 1978-82 including rebuilt fuel distributor, WUR and flow tested injectors. This is a bolt on system for half the price!

5) $150 - Perfect Mercedes 450 CIS fuel distributor. This is the one that 928 MSports sets up for 30% more fuel flow.

6) $60 - 928 CIS fuel distributor in need of a rebuild. Came of a running engine but I would have it gone through. The plunger shim is showing signs of stress.

7) $150 Each - I have two oil pans, one early 1978-83 the other later, pipe thread filler/vent tube versus bolt on. Both pans are in excellent condition.

8) $200 - I have a set of 1978-82 camshafts in good condition with followers

Buy it all for $2,000 + freight ($175-285 CONUS)

Pictures can be found HERE

If interested please PM me and I will try to be prompt.

Thanks!

Fronkensteen

Please Log in or Create an account to join the conversation.

More
01 Jul 2014 19:35 #17352 by mm928
Too early for me! 78's are not all that common, but someone will see it eventually.

1983 928S - 16v 4.7L L-Jetronic
Dark Grey w/ Blue Leather
85/86 exhaust manifolds
Y-Pipe
SS Hi-perf Cat
S4 springs
Bilstein shocks
Air pump delete
VIN: WP0JB0926DS861180
- - Isn't Life great? - -

Please Log in or Create an account to join the conversation.

More
01 Jul 2014 22:47 #17355 by Fronkenstein
I also have a nice set of M28.20 heads that were recently decked. They were run about 1000 miles and the engine was broken down only to find all the top rings were broken and the block bore was compromised. The heads are in great shape and are a bolt on. Asking the same as the 1978-82 heads.

Fronkensteen

Please Log in or Create an account to join the conversation.

More
21 Jan 2015 17:45 #17944 by Fronkenstein
Hey is anyone building anything? I've got a lot of engine parts like oil pans, heads, cranks, RaRST rods, cams, timing covers, cam towers, rebuildable 5 speed, euro LH parts, CIS parts, etc, etc. Make me an offer. I am on the right coast in NH. Most of the stuff is 1978, 1983 and 1986 (M28.1, M28.15 and M28.21). No body parts.

Fronkenstein - six zero three - three nine six - eight three five five

Please Log in or Create an account to join the conversation.

More
15 Feb 2015 17:29 #17998 by mm928
too early for me too! Good luck

1983 928S - 16v 4.7L L-Jetronic
Dark Grey w/ Blue Leather
85/86 exhaust manifolds
Y-Pipe
SS Hi-perf Cat
S4 springs
Bilstein shocks
Air pump delete
VIN: WP0JB0926DS861180
- - Isn't Life great? - -

Please Log in or Create an account to join the conversation.

Moderators: Rich928mm928billvvOC

Don't have an account yet? Register Now!